|
|
|
Enter Length and Width of
outside dimensions of building
|
Enter width of building
Enter length of building
|
 |
|
|
Choose Building Type
|
Use only one style of
building, all views are frontal, viewed from out side.
Please select the height of the building
|
 |
 |
Roof slope per foot
Select style
Eave height
For offset ridge only |
|
|
|
Top
Wall Type
|
| Select a type of wall using
butler wall panels, Block, Stucco, Dryvit Stud Wall
Construction or Tilt-Up Concrete.
One Type- This
style uses one type of wall construction on all four
sides. This type also includes steel rakes and
gutters.
Stacked Wall System- This style of wall
construction uses two types of materials, one on the
top and the other on the bottom. This type also includes
steel rakes and gutters. (Use only with stacked
walls.)
|
Select top of Stacked wall system
Select bottom of stack wall system
Front endwall
Right sidewall
Left sidewall
Rear end wall |
|
|
|
Canopy
|
Canopy construction using
steel framing with any style of the many roof types
listed, can be either vertical or sloped. First
choose the location of the canopy
and then choose the materials.
|
|
|
 |
Choose location of canopy
Choose type of canopy materials
|
|
Top
Roof Materials
|
| Select type of roofing material to be used for
entire building.
|
|
|
|
|
Top
Insulation
|
Insulation (except when thermal-wall is used) to be
fiberglass
with vinyl surface to the inside.
Select Insulation |
|
